optoway PDA-1500-3-XA ***************************************************************************************************************************************************************** **************************************************************************************************************************************************************** optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 11/1/2007 v1.0 PDA-1500-3-XA 3ghz ingaas pin photodiode module for catv receiver ****************************************** ******** ************************************************************************************************************** description pda-1500-3-sa ingaas pin photodiode series are high quality analog photodetectors designed for am catv receiver applications. these receptacle type modules are optically aligned to optimize performance and balance the parameters of responsivity, distortion and back reflection. pda-1500 series are suitable in forward and return path applications including am-vsb catv, qam 64/256, pon, fttc and ftth receivers. features electro-optical l low inter-modulation distortion l high responsivity l low back reflection packaging l receptacle absolute maximum ratings stress in excess of the absolute maximum rating can cause permanent damage to the device. these are absolute stress rating only. functional operation of the device is not implied at these or any other conditions in excess of these given in the operational sections of the datasheet. exposure to absolute ratings for extended periods can adversely affect device reliability. parameter symbol min max unit forward current 10 ma reverse current 10 ma reverse voltage 25 v power dissipation p diss 100 mw soldering temperature t solder 260/10 o c/sec operating temperature range t op -40 85 o c storage temperature range t stg -40 85 o c characteristics electrical and optical characteristics (t c = 25 o c, v r = 12v ) symbol parameter test conditions min. typ. max. unit = 1300nm 0.80 r responsivity = 1550nm 0.85 a/w im2 2 nd order intermodulation modulation note (1*) -70 dbc br back reflection = 1300 nm, 1550 nm -40 db i dark dark current v r =5v 1 na c capacitance f=1mhz, case ground, v r =5v 1.0 pf bw bandwidth 3 db down, r l =50 3.0 ghz 1*. im2 measured at v r =12v, =1550nm , p avg =0dbm, mi=0.7, r load =50, f 1 +f 2 =850.25 mhz, f 1 -f 2 =50.25mhz
optoway PDA-1500-3-XA ***************************************************************************************************************************************************************** **************************************************************************************************************************************************************** optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 11/1/2007 v1.0 precautions for use esd protection is imperative. use of grounding straps, anti-static mats, and other esd protective equipment is recommended when handling or testing an ingaas pin or any other junction photodiodes. mechanical dimension (mm) and pin assignment 1) fc/apc receptacle 2) sc/apc receptacle note: 1. specifications subject to change without notice. 2. other pin assignment is available upon request. order information part no.: p d a - 1 5 0 0 - 3 - code receptacle sa sc/apc fa fc/apc
|
